Selecting the Right Asphalt Shingle Material

Homeowners often turn to asphalt roofing materials to provide a waterproof and attractive home exterior. There are three basic types of asphalt shingles: strip asphalt roofing shingles, dimensional asphalt shingles, and premium asphalt shingles. Strip shingles are installed in a single layer and usually look like slate. These are the least expensive category and are using by Asphalt Roofing Install Harbor Springs, MI contractors when they are trying to keep costs down. Although they are budget-friendly they are strong and resist blow-off and tearing.

Dimensional asphalt roofing shingles add a richer looking to a roof because they are layered. Often the asphalt is designed to look like more expensive roofing materials. These shingles are thicker than strip shingles, so the homeowner can expect a longer warranty, which can range from 30 years and up.

Premium asphalt shingles combine asphalt with other laminate materials. These shingles have an upscale appearance and resemble natural shake roofing shingles. They are thicker and a better protection against high winds or hail. These more expensive shingles are designed to reflect solar energy. This keeps the attic cooler and reduces energy costs. It also extends the life of a roofing system.

Of course all shingle roofs have to be maintained properly. After a long Michigan winter it is necessary for a homeowner to hire a Asphalt Roofing Install Harbor Springs MI contractor to inspect the roof for any damage. The inspection will identify any loose or missing shingles. Taking care of these minor repairs can extend the life of a roof by many years. Some homeowners think that it is possible to install a roof and then forget about it until it’s time for a new one. Unfortunately that means they will probably need a new roof much sooner.

Even metal roofs which can last for 50 or 60 years, need an occasional Metal Roofing Repair. They develop leaks just like any other type of roof. Often the leak occurs at a seam. If a roofing contractor can’t locate the precise location of the leak. They may have to coat the entire metal roof again. Usually this has to be done every two years. After a tough winter, additional touch ups may be needed.