A Furnace that is well maintained will generally run better and more cost efficiently. In addition, such systems will often have a longer usage life than those, which are not taken care of on a regular basis. This can make it important that a homeowner have a company that specializes in repairing Furnaces make regular visits to inspect and perform maintenance on their system. While this type of work can be done at anytime of the year, the last months of summer can often be ideal.
As the summer begins to wind down, most furnace repair companies are generally not too busy. This means that it will be easier to schedule a maintenance visit. In addition, unlike months where the company is very busy, rates may a bit more reasonable during this time of year. Scheduling maintenance work early can also be helpful if major work that will be costly is needed. By starting early, a homeowner will have a bit of time to work repairs into their budget.
Most technicians from a company, like Hanna Heating & Air Conditioning Co., will want to inspect all aspects of the system. The burner is one area they will often spend a good deal of time. The burner is what actually provides the heat, so making sure it is in good order is important. A repair person will often be able to tell by looking at the condition of the flames of the burner if the unit is in need of repairs. Flickering or yellow and red flames generally indicate combustion issues and this will mean the unit must be taken apart and cleaned thoroughly.
Furnaces use a blower to move the warm air from the furnace into the ducts and vents of the home. This unit also tends to attract a good portion of dust and other matter, so it will need to be cleaned and the air filter on it replaced. This unit should also be inspected.
The motor on the blower powers the fan. This component will burn up if it is not wired properly. Since this can cause a lot of damage to the system and be a fire hazard, it should be inspected and repaired if necessary. Oil should be added to the motor’s oil ports if required so the bearings move easily. The fan belt that connects the motor and fan should be checked and the tension adjusted if necessary.